THE STA-RITE EC4 SERIES HAS BEEN DISCONTINUED BY THE MANUFACTURER. PLEASE
CLICK ON THE LINK BELOW FOR THE RECOMMENDED REPLACEMENT
(similar pump but under a different brand)
Sta-Rite EC Series Description
The Sta-Rite EC4 Series pump is a rugged, submersible cast iron pump with a
non-clog, semi-open impeller and solids handling capablility to 3/4"
Sta-Rite EC Series Specifications
- BODY CONSTRUCTION: Cast Iron
- HORSEPOWER: 4/10 HP
- MAXIMUM HEAD: Up to 40'
- FLOW AT 10' LIFT: 50 GPM
- SWITCH TYPE: Teathered
- MOTOR: 4/10 HP, Shaded pole with thermal overload protection
- SHAFT SEAL: Type 6A or equal, Bunea-N elastomers, carbon andceramic
sealing faces, stainless steel metal parts
- BEARINGS: Upper and lower ball bearings, oil lubricated
- IMPELLER: Fiberglass reinforced Noryl® with threaded brass insert
- DISCHARGE SIZE: 2" FNPT
- MAXIMUM SOLIDS HANDLING SIZE: 3/4"
- AMP DRAW: 9.7 full load amps
- POWER CORD: 20'
- VOLTAGE: 115 VOLT, 1PH, 60 Hz
- MAXIMUM LIQUID TEMPERATURE: 130 degrees F (55 degrees C)
Sta-Rite EC Series Pump Curve
Sta-Rite EC Series Product Resources
Download Sta-Rite EC Series Specification
Download Sta-Rite EC Series Manual
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov